NEC IT2510 Operation Manual Download Page 202

Page: 202 / 466

3 - 8

Registration and Setting Operations

Issue 1

NEC IT Series

Setting the Date and Time

Press <Utility>.

Select [Maint.] and touch [Time
& Date].

Follow the instructions to set the
date and time.

To Select:

Select the desired setting from [Year],
[Month], [Day], [Hour], and [Minute].

The selected key is displayed in
reverse.

To modify the Date and Time:

Press <Clear> (Clear key) and re-enter
the data.

Setting the Year
1. Touch [Year] and use the

10-key Pad to enter the year.

Setting the Month:

1. Touch [Month].

2. Use the 10-key Pad to enter

the month.

Setting the Date:

1. Touch [Day].

2. Use the 10-key Pad to enter

the date.

Setting the Hour:

1. Touch [Hour].

2. Use the 10-key Pad to enter

the hour.

Summary of Contents for IT2510



















































































































































































































































































































































































































































































Search results

Summary of Contents for IT2510

Reviews:

Related manuals for IT2510

Brands by name

Popular brands

NEC IT2510, Operation Manual

Search results

Summary of Contents for IT2510

Reviews:

Related manuals for IT2510

Brands by name

Popular brands