NEC IT2510 Operation Manual Download Page 224

Page: 224 / 466

3 - 30

Registration and Setting Operations

Issue 1

NEC IT Series

To save the received document in a mailbox:

1. Touch [Save to Box], then touch

[Enter].

Printing the document:

Retrieve the received document via the
Activity list screen and touch [Print].

Refer to Section 2.1 Confirming the
Communications Status in Chapter 6
Advanced Sending and Receiving
Operations on page 6-1.

To move the received document to another user’s mailbox:

1. Touch [Move].

2. Select the user to which the received

document is moved.

Do not specify the user to whom the
reception is transferred when the user
is set to [Move] in the Received
Document Setting in User Registration.

To select:

Touch the key for the user to whom the
received document is moved, or touch [User
Number] to select the user’s number.

To print:

Retrieve the received document via the
Activity List screen, and touch [Print].

Refer to Section 2.1 Confirming the Communications Status in Chapter
6 Advanced Sending and Receiving Operations on page 6-1.

Confirm the setting details when
the screen returns as that shown
in step 2. Touch [Enter] if the
setting is correct.

To modify:

Touch [Received Document] to change
the setting.

Touch [Enter] repeatedly until
the display returns to the stand-
by screen.

Settings for Received Documents (Continued)

Summary of Contents for IT2510



















































































































































































































































































































































































































































































Search results

Summary of Contents for IT2510

Reviews:

Related manuals for IT2510

Brands by name

Popular brands

NEC IT2510, Operation Manual

Search results

Summary of Contents for IT2510

Reviews:

Related manuals for IT2510

Brands by name

Popular brands