NEC IT2510 Operation Manual Download

Page: 221 / 466

NEC IT Series

Issue 1

NEC IT3510/IT2510 Operations Manual

3 - 27

2.10

Settings for Received Documents

This function is used to set how the operator wants a document to be handled
after reception.

Methods of Handling a Document after Reception:

Print: Prints the document as soon as it is received.

Forward: Forward the received document to another facsimile.

Print & Forward: Prints the document and also forwards it to another facsimile.

Save to Box: Saves the received document into a mailbox, that has been registered in
advance for each user, without printing it.

Move: Moves the received document to another user’s mailbox.

Before Starting Operations:

The factory default setting is to print the document as soon as it is received.

When the unit receives a remote copy facsimile, it prints a received document

irrespective of the current setting.

Select the key for the screen to
be displayed first, then touch
[Enter].

To select:

[One-Touch] - This selects the One-
Touch key screen as priority facsimile
screen.

[Abbr#.] - This selects the Abbreviated
dialing key screen as priority facsimile
screen.

[10-key Dialing] - This selects the 10-
key dialing input screen as priority
facsimile screen.

[Index] - This selects the Index key
screen as priority facsimile screen.

Confirm the setting details when
the screen returns as that shown
in step 3. Touch [Enter] if the
setting is correct.

Touch [Enter] repeatedly until
the display returns to the stand-
by screen.

Setting the Priority Facsimile Screen (Continued)

Summary of Contents for IT2510



















































































































































































































































































































































































































































































Search results

Summary of Contents for IT2510

Reviews:

Related manuals for IT2510

Brands by name

Popular brands

NEC IT2510, Operation Manual

Search results

Summary of Contents for IT2510

Reviews:

Related manuals for IT2510

Brands by name

Popular brands