1. Installing Internal Optional Devices
Express5800/T110f-S User’s Guide
81
Chapter 2 Preparations
7.
Insert the hard disk drive attached to the tray
into the slot of the HDD cage.
When it is pushed to the end, it locks with a
click.
8.
Connect the signal cables and power cable to the hard disk drive. Use the signal cables that come
with the HDD cage. Use the power cable connected to the motherboard in advance. For details about
cable connection, refer to
1.15.1 Internal interface cables
.
9.
Attach the front bezel and side cover you removed in step 2.
1.12.2
Removing hard disk drives
Remove the hard disk drives by using the following procedure.
Important When disposing of the hard disk drives, follow the instructions described in
Chapter 1 (1.2 Disposal of consumables and servers) in the Maintenance
Guide.
1. Refer
to
Chapter 2 (1.3 Overview of Installation and Removal)
for preparations.
2. While
referring
to
Chapter 2 (1.4 Removing the Side Cover
and
1.5 Removing the Front Bezel
),
remove the side cover and front bezel.
3.
Disconnect the power cable and signal cable from the Hard Disk Drives.
4.
Press the part shown in the figure to unlock the HDD tray, and then remove the hard disk drive out
from the HDD cage.
5.
Assemble the server.