2. Installation and Connection
Express5800/T110f-S User’s Guide
105
Chapter 2 Preparations
2.
Installation and Connection
This section describes how to position the server and connect cables.
2.1
Installation
CAUTION
Be sure to observe the following precautions to use of the server safely. Failure
to observe the precautions may cause burns, injury, and property damage. For
details, refer to Safety precautions in Precautions for Use.
•
Do not attempt to lift the server by gripping the front bezel or vent holes
cover.
•
Install and store only in the specified environment.
The environment suitable for the server is as follows.
Hold the server firmly, and slowly and gently place it in the position in which it is to be installed.
Cables for the mouse or other
devices are within easy reach.
At least 150 mm clearance in
front of/behind the server
A Dust-free, clean, and
organized room
100 VAC bipolar
grounded outlet
On a flat and
sturdy desk
The environment that satisfies the
following conditions
<Operating>
Ambient temperature:10
˚
C to 40
˚
C*
Humidity: 20% to 80%
Temperature gradient:
±
10
˚
C/hour
Air pressure: 749 to 1040 hpa
<Storage>
Ambient temperature: 5
˚
C to 40
˚
C*
Humidity: 10% to 80%
Temperature gradient:
±
15
˚
C/hour
Air pressure: 749 to 1040 hpa
100VAC bipolar grounded
outlet or bipolar outlet with
ground terminal (separate
adapter is required)