1. Installing Internal Optional Devices
Express5800/T110f-S User’s Guide
47
Chapter 2 Preparations
1.3
Overview of Installation and Removal
Install/remove components by using the following procedure.
1.
If the server is ON, turn it off.
Refer to
Chapter 3
(6.
Turning off the Server
).
2.
Disconnect the power cord from the outlet and the server.
3.
Disconnect all cables connected to the connector at the rear.
4.
Remove the side cover.
Refer to
Chapter 2 (1.4. Removing the Side Cover)
.
5.
Remove the front bezel if applicable.
Refer to
Chapter 2 (1.5 Removing the Front Bezel)
.
6.
Depending on the components to be installed or removed, follow the procedure in order.
Refer to
Chapter 2
(
1.6 Internal Flash Memory
to
1.14 Backup devices).
7. Connect
cables
Refer to
Chapter 2
(
1.15 Connecting cables)
.
8.
Attach the front bezel.
Refer to
Chapter 2 (1.16 Attaching the Front Bezel).
9.
Attach the side cover.
Refer to
Chapter 2
(
1.17 Installing the Side Cover)
.
This is the end of the installation or removal procedures for internal optional devices.
Continue the setup with reference to
Chapter 2 (2.2 Connection)
.