1. Installing Internal Optional Devices
Express5800/T110f-S User’s Guide
75
Chapter 2 Preparations
1.11.4
Configuration after installing
Depending on the type of card installed, you might need to use a utility (the BIOS setup utility included with
this server or a setup utility provided with the card) following installation to modify server settings.
Follow the instructions in the manual provided with the card to specify the correct settings.
After turning the server power on, the PCI bus numbers are scanned in ascending order. If the option ROM
installed in the card contains a BIOS utility, the startup message (banner) is displayed in ascending order of
the PCI bus numbers.
1.11.5
Removal
Remove a PCI card connected to a PCI slot by using the following procedure.
1. Refer
to
Chapter 2 (1.3 Overview of Installation and Removal)
for preparations.
2.
Remove the side cover while referring to
Chapter 2 (1.4 Removing the Side Cover)
.
3.
Refer to installation step 4 to open the PCI slot retention.
4.
Remove the card.
5.
Attach the blank cover, and refer to installation step 7 to close the PCI slot retention.
6.
Assemble the server.
7.
Turn on the server and confirm that no error messages are displayed in POST.
If an error message is displayed, take notes on the message and ask your maintenance service
company for maintenance.
