1. Installing Internal Optional Devices
Express5800/T110f-S User’s Guide
62
Chapter 2 Preparations
Connecting the battery control cable
Referring to the image below, connect the battery control cable into the battery pack. Check the
orientation of the connector and connect the cable straight into the connector.
Important When installing or removing the extra battery, pay special attention not to apply
excessive pressure on the part of the battery cover marked in the image below.
Otherwise, the part may break.
Installing the battery in the server
This section describes how to install this product in the server.
Getting ready to install the battery
1. Refer
to
Chapter 2 (1.3 Overview of Installation and Removal)
for preparations.
2. While referring to
Chapter 2 (1.4 Removing the Side Cover
and
1.5 Removing the Front Bezel
,
remove the side cover and front bezel.
Start
Preparation for installation
Connecting to RAID Controller
Finish
Installing the battery
The upper portion is wider than that of lower portion.
