![background image](http://html.mh-extra.com/html/nec/express5800-r320a-e4/express5800-r320a-e4_user-manual_251301169.webp)
Troubleshooting 6-7
Welcome to Setup.
This portion of the Setup program prepares Microsoft(R)
Windows(R) to run on your computer.
- To set up Windows now, press ENTER.
- To repair a Windows installation using
- Recovery Console, press R.
- To quit Setup without installing Windows, press F3.
Setup will load support for the following mass storage device(s):
Stratus Virtual Disk Driver
Stratus Embedded LSI Adapter
4.
When the screen to select SCSI drivers appears, follow the steps below.
(a)
When the following screen is displayed, press the
S
key.
(b)
Set the OS-specific “OEM-Disk” and press
Enter
.
(c)
Select [Stratus Virtual Disk Driver] and then press
Enter
.
The screen of (a) is displayed again.
(d)
Select [Stratus Embedded LSI Adapter] and then press
Enter
.
Go back to the screen of the procedure (a), press
S
key and proceed to the procedure
(d).
(e)
When the following screen appears, remove the floppy disk from the floppy disk drive
and press
Enter
.
Continue the operations by following the messages.
5.
When you start up Recovery Console from Windows Server 2003 CD-ROM, the following
message appears. Press the
R
key to boot Recovery Console.