![background image](http://html.mh-extra.com/html/nec/express5800-r320a-e4/express5800-r320a-e4_user-manual_251301152.webp)
5-8 Procedures after Completion of Installation
Installation
NEC ESMPRO Agent is automatically installed together with the installation or re-installation of
the NEC Express5800/ft series. NEC ESMPRO Agent may be installed manually on the Autorun
Menu of NEC EXPRESSBUILDER as follows:
IMPORTANT:
Installing to the models embedding ft Remote Management Card,
You must install and update NEC ESMPRO Agent after embedding/removing
ft Remote Management Card. If you do not, you will not be able to acquire the
device information properly.
Installation using ExpressSetup,
GAM and Power Console Plus may not be able to install automatically when
using ExpressSetup. On the models that GAM and Power Console Plus cannot
be installed with ExpressSetup, you must install GAM or Power Console Plus
depending on the disk array controller to be used after completing the Express
Setup.
Start the installation after the system completely starts up.
If installation is conducted right after the system startup, it may fail. Wait for a
while and retry if the error message appears.
1.
Log in with the Administrator privilege.
2.
Insert “NEC EXPRESSBUILDER” DVD into the DVD-ROM drive.
TIPS:
The DVD-ROM drive may be either the drive connected to the system or any optical disk
drive located on the network and connected by the LAN Manager. (These are collectively
called the optical disk drive hereafter).
The autorun function automatically displays the Autorun Menu of NEC
EXPRESSBUILDER.