4-68 Windows Setup
Data Disk Dual Configuration Procedure
Follow the procedure below to configure dual data disk for the slot 1 to 7.
IMPORTANT:
The following shows how to configure dual disk for the slot 1. If you want to
configure the dual disk for slot 2 to slot 7, read “slot 1” as the slots you want
to make dual configuration and perform the procedure.
1.
Insert a disk for the dual configuration into the slot 1 of PCI Module 10.
If a disk is already mounted, this procedure is not necessary. Go to step 2.
2.
Start [Computer Management]
by going to [Start]
−
[Control
Panel]
−
[Administrative Tools],
and select [Disk Management]
on the left tree. If the disk which
is to be set as dual configuration
shows as “Not Initilized” on the
right pane, right click on the
relevant disk to initialize.
IMPORTANT:
A popup window prompting to reboot appears when you insert or initialize
the disk; however, you do not need to reboot the system.
Select [No] to exit the popup window.
