NEC Express5800/320Fc-LR/MR, Setup Manual

Page: 48 / 132

Windows Setup 4-3
SETUP FLOW
The right flow-chart illustrates
the flow of the setup procedures for
the NEC Express5800/320Fc server.
Corresponding page numbers are shown
in parentheses.
Step 4: Start the Express Setup
Step 3: Disable OS Boot Monitoring Func tion
Step 2: Prepare for Express Setup
Step 1: Things Required for Setup
Set the startup CD-ROM
Prepare for Windows Server 2003 R2 32-bit Enterprise Edition
installation and ft Server Control Software installation
Specify the size of the partition for OS installation
Copy OS module to hard disk drive
Select language for HotFix
Automatic installation starts:
Windows Server 2003 R2 32-bit Enterprise Edition
ftServer Control Software
NEC ESMPRO Agent
Insert Windows Server 2003 R2 32-bit Enterprise Edition CD-
ROM in the DVD-ROM drive
Set the EXPRESSBUILDER CD-ROM
Step 13: Enable OS Boot Monitoring Function
Step 14: Make Settings for Failure Management
- Set memory dump (debug information)
- Set Dr. Watson
- Install a network monitor
- Set Recovery Console
Step 12: Set Network for NEC ESMPRO Agent
Step 11: Create Volume
Step 10: Connect and Configure Options
Step 5: Windows Setup Wizard
Step 7: Set Dual LAN Configuration
Step 9: Update Software
Step 8: Set Dual Disk Configuration
Step 6: Windows Server 2003 Service Pack
Installation
（ P.4-22)