NEC Express5800/320Fc-LR/MR, Setup Manual

Page: 19 / 132

Before Using 1-5
Use of Power Supply and Power Cord
Do not handle power plugs with a wet hand.
Do not plug/unplug power cords with a wet hand. There is a risk of an electric shock.
Do not connect the ground wire to a gas pipe.
Never connect the ground wire to a gas pipe. There is a risk of a gas explosion.
CAUTION
Do not plug the cords in nonconforming outlets.
Use wall outlets with specified voltage and power type. There is a risk of a fire or
current leakage.
Avoid installing the server where you may need extension cords. If the cords do not
meet the power specifications, there is a risk of overheating that could lead to a fire.
Do not plug too many cords in a single outlet.
If the rated current is exceeded, there is a risk of overheating that could lead to a fire.
Do not plug the cords insecurely.
Insert the plug firmly into an outlet. There is a risk of heat or fire due to poor contact. If
dust settles on the slots and it absorbs moisture, there is also a risk of heat or fire.
Do not use nonconforming power cords.
AC cord is to spend the thing of the next specifications:
You also have to observe the following prohibitions to prevent an electric shock or fire
caused by damage to the cords.

Do not pull on the cords.

Do not pinch the cords.

Do not bend the cords.

Keep chemicals away from the cords.

Do not twist the cords.

Do not place any object on the cords.

Do not use cords as bundled.

Do not alter, modify, or repair the cords.

Do not staple the cords.

Do not use any damaged cord. (Replace it with a new one of the same
specifications. For replacement procedures, contact your sales agent.)