NEC Express5800/140Re-4, User Manual

Page: 423 / 494

Upgrading Your Server 9-49
5.
Push the PCI board until the connection part of the board is firmly connected into the slot.
IMPORTANT:
If failing to install the PCI board correctly, reinstall it.
Be careful not to apply excess force to the PCI board when handling it.
Applying excess force may cause damage to the PCI board.
NOTES:
After installed the long board, secure it with the lock on the upper part
of the guide rail.
„
The insulators are installed between the PCI board slots.
They are for protecting the PCI board already been installed. Take
care not to remove or damage the insulator when installing or
removing the PCI board. If the insulator is taken off, reinstall the
insulator in place.
6.
Connect the cables to the PCI board while firmly holding the PCI board with your hand.
7.
Slowly close the tab to secure the PCI board.
8.
Press the PCI hot plug switch.
The PCI Slot Power lamp flashes once, and then goes on.