NEC Express5800/140Re-4, User Manual

Page: 118 / 494

4-14 Configuring Your Server
Memory Configuration
Selecting "Memory Configuration" on the Advanced menu shows the following screen.
See the table below for the items.
Option Parameter Description Your Setting
DIMM Group
#1 - #8
Status Normal
Not installed
Disabled Indicates the current memory status.
"Normal" indicates that the memory devices
operate normally.
"Disabled" indicates that one or more memory
devices are defected.
"Not Installed" indicates that no memory
devices are installed. (Display only)
Memory
Retest [No]
Yes Clears the DIMM group error status
information. Run this menu when the failed
DIMM(s) are replaced.
Extended
RAM Step 1MB
1KB
Every Location
[Disabled] "1MB" indicates that the memory test is done in
the unit of 1MB. "1KB" indicates that the
memory test is done in the unit of 1KB.
"Every-Location" indicates that every memory
device is tested. "Disabled" indicates that only
memory initialization is done.
Online Spare
Memory [Disabled]
Enabled Select "Enabled" to enable the Online Spare
Memory feature.
Memory RAS
Feature [Normal]
Mirror
RAID Set the memory configuration. Select "Mirror" to
enable the memory mirroring function. Select
"RAID" to enable the memory RAID function.
Hot-Add
Memory
Support [Disabled]
Enabled Specify whether to use the Hot-Add Memory
feature on Windows Server 2003 Enterprise
Edition or Datacenter Edition. Select "Enabled"
to use the Hot-Add Memory feature.
[ ]: Factory-set