8-24 Troubleshooting
Error
code
Error message
Recommended Action
8130
Mismatch DIMM Type detected in DIMM group
#1.
8131
Mismatch DIMM Type detected in DIMM group
#2.
8132
Mismatch DIMM Type detected in DIMM group
#3.
8133
Mismatch DIMM Type detected in DIMM group
#4.
8134
Msmatch DIMM Type detected in DIMM group
#5.
8135
Mismatch DIMM Type detected in DIMM group
#6.
8136
Mismatch DIMM Type detected in DIMM group
#7.
8137
Mismatch DIMM Type detected in DIMM group
#8.
See the labels put on the DIMMs to make
sure that the DIMMs of the same type are
installed in groups. If DIMMs of different
types are installed in one or more groups,
contact the service representative to
replace DIMMs properly.
8140
DIMM group #1 with error is enabled.
8141
DIMM group #2 with error is enabled.
8142
DIMM group #3 with error is enabled.
8143
DIMM group #4 with error is enabled.
8144
DIMM group #5 with error is enabled.
8145
DIMM group #6 with error is enabled.
8146
DIMM group #7 with error is enabled.
8147
DIMM group #8 with error is enabled.
Contact your service representative to
replace the two DIMMs in the relevant
group.
8150
NVRAM Cleared By Jumper.
8151
Password Cleared By Jumper.
Turn off the power. Then recover the
jumper setting to the original setting.
8160
Mismatch Processor Speed detected on
Processor 1.
8161
Mismatch Processor Speed detected on
Processor 2.
8162
Mismatch Processor Speed detected on
Processor 3.
8163
Mismatch Processor Speed detected on
Processor 4.
Check the frequency of the processor. If
it is unknown, contact your service
representative.
8170
Processor 1 not operating at intended frequency
8171
Processor 2 not operating at intended frequency
8172
Processor 3 not operating at intended frequency
8173
Processor 4 not operating at intended frequency
817F
All processors not operating at intended
frequency
81A0
Cache Cautionary status detected on Processor
1.
81A1
Cache Cautionary status detected on Processor
2.
81A2
Cache Cautionary status detected on Processor
3.
81A3
Cache Cautionary status detected on Processor
4.
This is not a fatal error. Turn off the power
once and then on again to restart the
server. If the error cannot be corrected,
contact your service representative.
Summary of Contents for Express5800/140Re-4
