NEC Express5800/140Re-4, User Manual

Page: 195 / 494

Configuring Your Server 4-91
Server Setup
This section explains the contents which must be carried out by the server side, when using a
Remote Management Feature.
Initial Setup
To use the Web server feature, change settings as shown below.
Start the NEC EXPRESSBUILDER from CD-ROM, and select [System Management]
→
[Set
Advanced Remote Management Card] from the Tools menu.
On the [Set Advanced Remote Management Card], select [Remote Management Console]
→
[Enabled], and then select [Register].
IMPORTANT:
For security, the Web server feature of BMC is
disabled at the shipment.
Setting of Graphics Accelerator Driver
„
When your server's OS is Windows
Use the driver which is installed at initial setup by Express Setup or system update.
„
When a server's OS is Linux
Since it may be automatic and a setup of a monitor/Driver/video memory may not be able
to be performed by composition when OS is Linux. We recommend you to use it in text
mode.
Setting of Mouse Properties
Clear a check box of "Enhance pointer precision" in "Motion" in "Pointer Options" in "Mouse
properties", when the server OS is Windows Server 2003.
Please adjust "Select a pointer speed", when you cannot move a mouse pointer up to the bottom
right side of the host server screen via the remote KVM console.