NEC Express5800/120Rc-2, Service Manual, Page: 45 / 194

Setting Up the System 2-17
Opening the Front Bezel
Refer to the Figure 2-15 and open the front bezel of the cabinet as follows:
1.
Open the front door of the system rack.
2. If the front bezel is locked, unlock it by inserting the key and turning the key
to the unlocked position.
3.
Grasp the indentation located on the right edge of the front door and pull the
bezel towards you to open it.
4. Slide the bezel to the right and remove it from the system.
5. Remove the two screws securing the server to the front of the system rack.
6. Pull the server out of the rack until the component rail release latches
engage. The component rail release latches on either side of the server lock
the server onto the slide rails.
Figure 2-15. Opening the Front Door