NEC Express5800 120Ld, User Manual

Page: 60 / 167

3-14 Configuring Your System
Console Redirection Submenu
Feature
Choices or
Display Only
Description Your Setting
Serial Port Address Disabled
Serial Port 2
(3F8h/IRQ4)
Serial Port 2
(2F8h/IRQ3)
If enabled, the console will be
redirected to this port.
If console redirection is
enabled, this address must
match the settings of serial
port 2.
Baud Rate 57.6K
19.2K
Enables the specified baud
rate.
Flow Control No Flow Control
XON/OFF
Enables flow control.
Console
Connection
Direct
Via Modem
Indicate whether the console is
connected directly to the
system or a modem is used to
connect.
Boot Menu
Use the up or down arrow keys to select a device, then press the <+> or <->
keys to move the device higher or lower in the boot priority list.
Boot Device Priority Menu
Boot Priority Device Description Your Setting
1. ATAPI CD-ROM
Drive Attempts to boot from an
ATAPI CD-ROM drive.
2. Diskette Drive Attempts to boot from a
diskette drive.
3. Hard Drive Attempts to boot from a hard
drive device.
4. Intel UNDI, PXE-
2.0 (Build 071) Attempts to boot from
diagnostic boot partition of the
flash memory.