NEC Express5800 120Ld, User Manual

Page: 143 / 167

B-16 Management Workstation Application
!
[Activate] is checked — When an alert is received from a server, the
window of the server becomes active. If [Activate] is checked for
RESET or POST Error alert, MWA attempts to connect to the server. If
[Use Default Settings] is checked, this property is set to the values set by
the Defaults command.
!
Remote Drive page — A remote drive can be set for a server.
!
[None] is check — A remote drive is disabled. Server
’
s local drive can
be used.
!
[Floppy A:] is checked — A floppy disk drive on the management PC
becomes a remote drive for the server.
!
[FD Image File:] is checked — A specified FD image file in the
management PC becomes a remote drive for the server. If an image file
is set as a remote drive, click the Create/Copy Image File button to
display the Create/Copy Image File dialog box. From there you can
create an image file or copy one to a floppy disk. If [Read Only] is
checked, one FD image file can be used by more than one server. If [Use
Default Settings] is checked, this property is set to the value set by the
Defaults command.
Default Server Properties Dialog Box
From the Default Server Properties dialog box you can view and set basic
properties of all servers. If [Use Default Settings] in the Server Properties dialog
box is checked, the server property is set to the values set by the Defaults
command.
!
Alert page — Set MWA operation for each type of alert from a server.
!
[Sound] check — MWA beeps when an alert is received from a server.
The server window of the server becomes active.
!
[Activate] check — When an alert is received from a server, the
window of the server becomes active. If [Activate] is checked for
RESET or POST Error alert, MWA attempts to connect to the server.
!
Remote Drive page — A remote drive can be set for servers.
!
[None] check — A remote drive is disabled. Server
’
s local drive can be
used.
!
[Floppy A:] check — A floppy disk drive on the management PC
becomes a remote drive for the server.
!
[FD Image File:] check — A specified FD image file in the
management PC becomes a remote drive for the server. If a FD image
file is set as a remote drive, click the Create/Copy FD Image File button
to display the Create/Copy FD Image File dialog box where you can
create an FD image file or copy one to a floppy disk. If [Read Only] is
checked, one FD image file can be used on multi servers.