NEC Express5800 120Ld, User Manual

Page: 132 / 167

Management Workstation Application B-5
7.
Set the SG information as follows. (The items with * marks must be
entered.)
!
Computer Name*
Enter the server name.
!
IP Address*
Enter the IP address of the server.
!
Subnet Mask*
Enter the subnet mask of the server.
!
Default Gateway*
Enter the IP address of the default gateway on the network.
!
Management PC (1)(3)’s IP*
Enter the IP address of the management PC with MWA installed.
(1)(3) shows priority.
!
Pass-phrase*
Enter the pass-phrase that is used for communication between server -
RomPilot and management PC - MWA.
!
Community Name (SMC supported servers)
Enter a key for authentication used between server SMC and
management PC - MWA (community name for SNMP trap). Default
value is public.
!
Magic Number (SMC supported servers)
Enter code key that is used between server - SMC and management PC -
MWA.
!
Recovery Mode (SMC supported servers)
Select automatic or manual.
If automatic is selected, SMC automatically executes recovery
processing when a fault occurs. It will be accepted as an instruction from
MWA.
!
SOS Alert (SMC supported servers)
Select SOS Alert enabled or disabled.
If disabled is selected, SMC will not send an SOS message to MWA
when a fault occurs.
8. Select Save Setting . SG information is saved on the floppy disk. You will
need this floppy disk (called the SG information FD) to register the server
on the management PC MWA.
Note:
For details on Network setup, see
E
XPRESS
B
UILDER
online help.