NEC Express5800 120Ld, User Manual

Page: 162 / 167

Equipment Log 1
Equipment Log
Use this equipment log form to record pertinent information about your system. You
will need some of this information to run the System Setup Utility. Be sure to update
the equipment log when you add options.
Record the model and serial numbers of the system components, dates of component
removal or replacement, and the name of the vendor from whom the component was
purchased. Be sure to record the same information for any components added to the
system, such as a power supply, hard disk drives, add-in boards, or printers.
Record the model and serial numbers of the unit and system baseboard. The model and
serial numbers of the system unit are recorded on a label attached to the rear of the unit.
The serial number of the system board is located along the left side of the board, near
the PCI expansion slot covers.
The location of serial numbers on add-in boards, hard disk drives, and external
equipment, such as video displays or printers, varies from one manufacturer to another.
Literature accompanying these products should illustrate or describe the location of
model and serial numbers.