NEC Express 5800/320Lb-R User Manual Download Page 4

Page: 4 / 302

SYMBOLS USED IN THIS USER'S GUIDE AND WARNING LABELS

Attention

Indicates a risk of an electric shock.

Indicates a risk of an injury due to heat.

Indicates a risk of catching your fingers.

Indicates a risk of a fire or smoke.

Indicates a general precaution or warning that is not defined herein.

Indicates a risk of losing eyesight due to laser beam.

Indicates a risk of an injury or damage to physical assets due to a hazardous material.

Prohibited actions

Indicates a general prohibition that is not defined herein.

Do not disassemble, repair, or modify the equipment. Otherwise, there is a risk of an
electric shock or fire.

Mandatory actions

Unplug the server. Otherwise, there is a risk of an electric shock or fire.

Indicates a general action to take that is not defined herein. Make sure to follow the
instructions.

Summary of Contents for Express 5800/320Lb-R















































































































































































































































































































Search results

Summary of Contents for Express 5800/320Lb-R

Reviews:

NEC Express 5800/320Lb-R, User Manual, Page: 4 / 302

Search results

Summary of Contents for Express 5800/320Lb-R

Reviews: