NEC Express 5800/320Lb-R User Manual Download Page 115

Page: 115 / 302

4-31

22.

Select the proper adapter.

IMPORTANT:

The adapter "QLA12160 Ultra3 2000" is used for built-in hard disk.

Do not select it.

Highlight the displayed item with the cursor keys and press

Enter

QLA12160 Ultra3

2000

xxxxxxxxxxxxxxxxxxxxxxxx xxxx
xxxxxxxxxxxxxxxxxxxxxxxx xxxx

Select Host Adapter

Adapter Type

I/O Address

The display returns to "Fast!UTIL Options." The name of the selected host adapter
appears at the upper left corner of the screen.

Configuration Settings
Scan SCSI Bus

SCSI Disk Utility

Select Host Adapter
Exit Fast!UTIL

Fast!UTIL Options

Summary of Contents for Express 5800/320Lb-R















































































































































































































































































































Search results

Summary of Contents for Express 5800/320Lb-R

Reviews:

NEC Express 5800/320Lb-R, User Manual, Page: 115 / 302

Search results

Summary of Contents for Express 5800/320Lb-R

Reviews: