46
Important
The setting is reflected after the server restarts. If you changed the setting, shut
down the server and change the network configuration before starting up the
server.
set_powinh
Update the power OFF inhibition status of ExpEther boards (1G and 10G).
eemcli.py set_powinh --id ID --state STATE [--time TIME]
--id ID, -i ID: Specify the EE card ID.
--state STATE, -s STATE: Specify
“enabled” or “disabled”.
--time TIME, -t TIME: Specify the update time of the device information (elapsed time from
1970/1/1 00:00:00 000 UTC in milliseconds).
o
Specify
“--time/--t” to verify whether the specified update time is equal to that of the
device information.
Important
The setting is reflected after the server restarts. If you changed the setting, shut
down the server and change the network configuration before starting up the
server.
set_hostinfo
Update the host information set in the ExpEther board.
eemcli.py set_hostinfo --id ID --serial SERIAL --model MODEL [--time TIME]
--id ID, -i ID: Specify the EE card ID.
--serial , -s SERIAL: Specify the serial number (up to 32-byte character string).
--model MODEL, -m MODEL: Specify the model (up to 32-byte character string).
--time TIME, -t TIME: Specify the update time of the device information (elapsed time from
1970/1/1 00:00:00 000 UTC in milliseconds).
o
Specify
“--time/--t” to verify whether the specified update time is equal to that of the
device information.
set_maxio
Update the maximum IO number connectable to the ExpEther board.
eemcli.py set_maxio --id ID --count COUNT [--time TIME]
--id ID, -i ID: Specify the EE card ID.
--count COUNT, -c COUNT: Specify the maximum number of EEIO (0 to 8 (1G and 10G) ,
or 0 to16 (4G) ).
--time TIME, -t TIME: Specify the update time of the device information (elapsed time from
1970/1/1 00:00:00 000 UTC in milliseconds).
o
Specify
“--time/--t” to verify whether the specified update time is equal to that of the
device information.
set_pcieinfo
Update the PCle device information mounted on the ExpEther IO Expansion Unit (1G and 10G).
eemcli.py set_pcieinfo --id ID --vendor VENDOR --device DEVICE --class CLASS [--time
TIME]
--id ID, -i ID: Specify the EE card ID.
--vendor VENDOR, -v VENDOR: Specify the vendor ID (0x0 to 0xffff).
--device DEVICE, -d DEVICE: Specify the device ID (0x0 to 0xffff).
--classcode CLASSCODE, -c CLASSCODE: Specify the class code (0x0 to 0xffffff).
--time TIME, -t TIME: Specify the update time of the device information (elapsed time from
1970/1/1 00:00:00 000 UTC in milliseconds).
o
Specify
“--time/--t” to verify whether the specified update time is equal to that of the
device information.
Summary of Contents for ExpEther-2S
Page 2: ... Memo ...
Page 111: ...91 Memo ...