10
Chapter 3. Setup
This chapter describes how to handle the unit correctly.
3.1 Notes on installing built-in options
This section describes installing options to the ExpEther IO Expansion Unit (40G) and precautions.
Important
We recommend that a specialist, who is familiar with the unit and is an
engineer of a maintenance service company, install built-in options.
Use parts specified by our company for built-in options and cables. If you
install other options than those specified, you should pay for a repair due
to malfunction, failure or damage even
under
the warranty period.
3.2 Safety notes
Important
Be sure to read “Precautions for use” described in the user’s guide or the
startup guide attached to the unit. “Precautions for use” describes important
precautions to safely and correctly use this product.
3.3 Anti-static measures
This product contains static-sensitive electronic components. Take the measures below to avoid a
failure caused by static electricity when installing or uninstalling any optional device.
●
Wearing anti-static wrist strap or anti-static gloves
Wear a wrist strap on your wrist and connect the wire to the chassis. If there is no wrist strap,
touch an unpainted metal surface of the chassis connected to the ground to discharge static
electricity from your body before touching the component. Touch the metal part occasionally to
discharge the static electricity while working on the component.
●
Checking the workplace
-
Work on an anti-static floor or concrete floor.
-
If you work on a place where static electricity is likely to be generated (e.g. carpet), be sure
to provide anti-static protection.
●
Using the work table
Place the server on a mat with electrostatic discharge (ESD) protection.
●
Clothing
-
Do not wear wool or synthetic clothes.
-
Wear anti-static shoes.
-
Remove any kind of metal accessories such as a ring, bracelet or wrist watch.
●
Handling of components
-
Keep the component in an anti-static bag until you install it to the product.
-
Hold the component by the edges to avoid touching any terminals or mounting parts.
-
Place the component in an anti-static bag when storing or moving it.
Summary of Contents for ExpEther-2S
Page 2: ... Memo ...
Page 111: ...91 Memo ...
