NEC ExpEther-2S, User Manual

Page: 65 / 112

45

--time TIME, -t TIME: Specify the update time of the device information (elapsed time from
1970/1/1 00:00:00 000 UTC in milliseconds).
o
Specify
“--time/--t” to verify whether the specified update time is equal to that of the
device information.
Important If you have changed the multiple MAC address mode from enabled to disabled,
connect each QSFP+ port pair(*) to the different networks on the ExpEther
device (40G).
(*) Port 1 and port 2, and port 3 and port 4 are paired respectively.
Important The setting is reflected after the server restarts. If you changed the setting, shut
down the server and change the network configuration before starting up the
server.
set_encrypt
Update the encrypting mode of the ExpEther unit (40G).
eemcli.py set_encrypt --id ID --encrypt ENCRYPT [ENCRYPT ...] [--time TIME]

--id ID, -i ID: Specify the EE card ID.

--encrypt ENCRYPT [ENCRYPT ...], -e ENCRYPT [ENCRYPT ...]: Specify
“enabled” or
“disabled”.
o
Specify the encrypting mode for downstream port 0-15 if the EE card status is EESV.
o
Specify the encrypting mode for upstream ports if the EE card status is EEIO.
o
If the encrypting mode
is not specifid, “disabled” value is set.

--time TIME, -t TIME: Specify the update time of the device information (elapsed time from
1970/1/1 00:00:00 000 UTC in milliseconds).
o
Specify
“--time/--t” to verify whether the specified update time is equal to that of the
device information.
Important The setting is reflected after the server restarts. If you changed the setting, shut
down the server and change the network configuration before starting up the
server.
set_compati
Update the compatible mode between 1G and 10G version units of the ExpEther unit (40G).
eemcli.py set_compati --id ID --compati COMPATI [COMPATI ...] [--time TIME]

--id ID, -i ID: Specify the EE card ID.

--compati COMPATI [COMPATI ...], -c COMPATI [COMPATI ...]: Specify
“10g” or “40g”.
o
Specify the EE card type of EEIO connectable to 40G EESV downstream port 0-7.
o
If the compatible mode is not specified, “40g” value is set.

--time TIME, -t TIME: Specify the update time of the device information (elapsed time from
1970/1/1 00:00:00 000 UTC in milliseconds).
o
Specify
“--time/--t” to verify whether the specified update time is equal to that of the
device information.
Important The setting is reflected after the server restarts. If you changed the setting, shut
down the server and change the network configuration before starting up the
server.
del_compati
Delete the compatible mode between 1G and 10G version units of the ExpEther board (40G).
eemcli.py del_compati --id ID [--time TIME]

--id ID, -i ID: Specify the EE card ID.

--time TIME, -t TIME: Specify the update time of the device information (elapsed time from
1970/1/1 00:00:00 000 UTC in milliseconds).
o
Specify
“--time/--t” to verify whether the specified update time is equal to that of the
device information.