NEC ExpEther-2S, User Manual

Page: 59 / 112

39
Subcommand description
set_hosinfo Update the host information set in the ExpEther board.
set_maxio Update the maximum IO number connectable to the ExpEther
board(10G).
Note
：
This command is intended for ExpEther units (10G).
set_pcieinfo Update the PCle device information mounted on the ExpEther IO
Expansion Unit (1G and 10G).
Note
：
This command is intended for ExpEther units (1G and 10G).
set_powlink Update the power interlocking status of ExpEther clients and IO
Expansion units (1G and 10G).
Note
：
This command is intended for ExpEther client and IO
Expansion unit units (1G and 10G).
del_iomac Delete the MAC address information of ExpEther clients and IO
Expansion units allocated to the downstream port of the ExpEther
board.
get_groups Get the list of the group ID information.
get_apiver Get the version information of API provided by ExpEther Manager.
dump_stats Output the statistic information kept by ExpEther Manager to the log
file.
unlock_eeprom Unlock EEPROM access forcibly.
(7) Command reference
dumpreg
Dump the data of registers of the ExpEther engine.
eemcli.py dumpreg --id ID [--address ADDRESS] [--length LENGTH]

--id ID, -i ID: Specify the EE card ID.

--address ADDRESS, -a ADDRESS: Specify the start address (0x0-0xfffc, multiple of 4).
(Default: 0x0)

--length LENGTH, -l LENGTH: Specify the data length (1-24576) to be gotten. (Default: 4)
o
The specified value is rounded to the multiple of 4.
o
If the value of
“A LENGTH” exceeds 0xfffc, the data up to 0xfffc is returned.
readreg
Read the data of registers of the ExpEther engine.
eemcli.py readreg --id ID --address ADDRESS

--id ID, -i ID: Specify the EE card ID.

--address ADDRESS, -a ADDRESS: Specify the address of the register (0x0-0xfffc, multiple
of 4).
writereg
Write the data of registers of the ExpEther engine.
eemcli.py writereg --id ID --address ADDRESS --data DATA [--verify VERIFY]

--id ID, -i ID: Specify the EE card ID.

--address ADDRESS, -a ADDRESS: Specify the address of the register (0x0-0xfffc, multiple
of 4).

--data DATA, -d DATA: Specify the data of the register (0x0-0xffffffff).

--verify VERIFY, -V VERIFY: Specify
“enabled” or “disabled”. (Default: enabled)
o
If you specify
“enabled”, you have the data read and verified after writing.