
4-18
Upgrading Your System
Removing DIMMs
!
CAUTION
Use extreme care when removing a DIMM. Too much pressure
can damage the socket slot. Apply only enough pressure on
the plastic ejector levers to release the DIMM
4.
Power off the system and remove the left side panel as described
earlier in this chapter.
2.
Gently push the plastic ejector levers out and down to eject a DIMM
from its socket.
3.
Hold the DIMM only by its edges, being careful not to touch its
components or gold edge connectors. Carefully lift it away from the
socket, and store it in an antistatic package.
4.
Repeat the above steps to remove the remaining DIMMs.
5.
Replace the side panel and turn on the system.
Summary of Contents for ES1400
