
C-4 Emergency Management Port Console
Console in Redirect State
The above figure shows the EMP window in redirect state with the
terminal window. The text that appears on the server monitor displays
in the redirect window.
Availability of the various EMP features is determined by two things: the
EMP access mode selected during configuration in the System
Management Submenu of the BIOS Server Menu, and if the server's
COM 2 port is configured for console redirect in BIOS. The three EMP
access modes are disabled, pre-boot, and always active.
EMP Access Modes (Server Configured for Console Redirect)
Mode
Server is powered off
During POST
After OS boots
Disabled
Redirect window appears,
but is blank
Redirect window
Redirect window
Pre-boot
EMP commands available
Redirect window*
Inactive redirect
window
Always Active
EMP commands available
Redirect window*
EMP commands
available
*The operation mode can be modified by selections in the post reset and post-power-up
dialogs. These are server control dialogs available with the EMP.
Summary of Contents for ES1400
