
3-20
Configuring Your System
Changing the Adapter and Device Configurations
The SCSI Configuration Utility Main Menu lists the onboard SCSI
adapter and shows its current settings. The adapter controls the
operation of the SCSI devices in your system (hard disk drives or
removable media devices).
1.
Select “Adapter Setup” and press
ENTER
. The Adapter Setup screen
displays.
Adapter Setup Screen
Description
Recommended Setting or
Display Only
Your Configuration
SCAM Support
On
Parity
On
Host SCSI ID
7
Scan Order
Low to High
Removable media support
None
CHS Mapping
SCSI Plug and Play Mapping
2.
Highlight the function you want to change and press
ENTER
. You
will be prompted to save changes when you exit the configuration
utility.
To change device configuration parameters, perform the following steps:
1.
At the SCSI Configuration Utility Main Menu, select “Device
Selections” and press
ENTER
. The Devices 0 to 7 screen displays.
2.
Select the SCSI device you are reconfiguring and press
ENTER
. If
you are configuring SCSI Hard Disk Drives, refer to the "SCSI Hard
Disk Drives" Table below; if you are configuring SCSI Removable
Media Devices, refer to the "SCSI Removable Media Devices" Table
below for recommended settings.
Summary of Contents for ES1400
