
Emergency Management Port Console C-9
Server Control Operations
Three server control operations are available from the menu or toolbar
of the main EMP window, remote server connection, powering the server
on and off, and resetting the server. The server console mode can also
be switched between EMP active and BIOS redirect modes through
post-power-up and reset options.
Connect
When you select [Re]Connect from the Connect menu, the Connect
dialog allows you to connect to a selected server. If the client machine is
already connected to a server, initiating connection generates a warning
message. It lets you know that the existing connection will be
terminated if you continue trying to initiate the new connection. You
are prompted to enter the EMP password whenever a connection is
attempted.
Connect Dialog
Options available in the dialog are:
Line Selection
- you can specify whether to use a direct connection
or dial-up modem connection to the server.
Dial-up
- connects to a selected server with a modem.
Direct connect (Serial Line)
- connects to the selected server
directly using a null modem serial cable.
Server
- you can select or enter a server name from a dropdown edit
list box of available servers. A server must be selected when the line
selection is Dial-up.
Summary of Contents for ES1400
