
Problem Solving 5-9
Specific Problems and Corrective Actions
This section provides possible solutions for the following specific
problems:
Power LED does not light
No beep or incorrect beep pattern
No characters appear on screen
Characters on the screen appear distorted or incorrect
System cooling fan does not rotate
Diskette drive activity LED does not light
Hard disk drive activity LED does not light
CD-ROM drive activity LED does not light
Problems with application software
The startup prompt “Press <F2> key if you want to run Setup” does
not appear on the screen
The bootable CD-ROM is not detected
The SSU does not boot.
Try the solutions in the order given. If you cannot correct the problem,
contact your service representative for assistance.
Power LED Does Not Light
Check the following:
Is the system operating normally? If so, the power LED is probably
defective.
Are there other problems with the system? If so, check the items
listed under System Cooling Fans Does Not Rotate.
Summary of Contents for ES1400
