TERMINAL SETUP
32
The IP address input screen can be
switched to URI input screen by the
Soft key (IP/URI).
Press Soft Key (IP/URI)
Press Soft Key (IP/URI)
again to go back to the IP
address input screen.
17.
Select “ 1
Data Backup”
18.
Enter the file name by digit keys.
The default name is displayed.
Press Soft key (BK) once to delete the
default file name.
Enter the file name that is Backup.
Please refer to “
” for how to enter the
character.
Up to 64 characters can be entered as
a file name.
When you send to the server the date
from a terminal, it is possible to select
the file format with encryption. Press
Soft Key (Enc) to send the file with
encryption.
Press Soft key (No Enc) to send the file
without encryption.
Do not change the extension of backup
file. The setting data of the terminal
can only be backed up as a (.tgz) /
(.tgz.ef) file.
19.
Press Soft key (Exec).
A Backup is started.
20.
Press Soft key (Exit).
The display goes back to the
[Backup/Restore] screen.
When the backup process ends in
failure, “Upload Failed!” is displayed on
the LCD. Check to see the following
points and retry backup.
CHECK POINTS
ACTIONS
Check whether IP
address/address (URI)
of FTP/TFTP/HTTPS
server is correct or not.
Set the proper IP
address/address
(URI) of
FTP/TFTP/HTTPS
server.
Check whether the
power to
FTP/TFTP/HTTPS
server and network
equipment is ON or
not.
Turn on the power.
Check whether the
LAN cable is
connected securely.
Reconnect the cable
securely.
If the retry of uploading fails many
times, the terminal may be in failure.
For details, please contact the system
administrator.
Other than above conditions, if
"Download Failed!" or "Upload Failed!"
is displayed, please contact the system
administrator.
TO RESTORE THE SETTING DATA OF
TERMINAL
1.
Display the Menu
screen, and select “Settings”
2.
Select “ 3
Data Backup/Restore”.
3.
Select “ 4
Protocol”
4.
Select a Protocol type of the server which stores
the Backup file.
5.
According to the selection in [Protocol] screen,
proceed to the following steps below.
When
“ 1 FTP” is selected here, goto 6
When
“ 2 TFTP” is selected here, goto
12
When
“ 3 HTTPS” is selected here, goto
6
6.
Select “ 5
Account Settings”
7.
Select “ 1
User ID”
