OUTLINE
15
INSTALLATION PROCEDURE
ATTACHING OR REMOVING
FACEPLATE AND DESI PRINTER
SHEET
REMOVING FACEPLATE AND
DESI PRINTER SHEET
Remove DESI Printer Sheet with following ways.
1.
Use the small notch at the lower right corner of
the terminal to lift the Faceplate up.
2.
Remove the Faceplate.
3.
Remove the DESI Printer Sheet.
(1) Line Key Panel
(2) Face Plate
(3) DESI Printer Sheet
ATTACHING FACEPLATE AND
DESI PRINTER SHEET
1.
After replacing the DESI Printer Sheet on the
terminal, attach the Faceplate.
2.
At each corner, press the locking pin back into
place.
(1) Line Key Panel
(2) Face Plate
(3) DESI Printer Sheet
Please attach the Faceplate securely.
If not, the terminal will not operate
properly because a key is possibly
being pushed by the Faceplate.
ADJUSTING ANGLE OF TILT LEGS
The height can be adjusted by moving the legs
attached to the bottom of the terminal.
(1) First Position
(2) Second Position
(3) Third Position
(4) Forth Position
(5) Fifth Position
RAISING TILT LEGS
1.
Turn the terminal over (key side down).
2.
Raise Tilt Legs to desired height.
3.
Turn the terminal over (key side up).
(1)
(2)
(3)
(1)
(2)
(3)
(4)
(5)
Tilt Leg
(1)
(2)
(3)
