NEC DSX, Feature Handbook

Page: 40 / 192

Call Timer
Call Timer helps you keep track of your time on the phone.
Use Call Timer to show the duration of your outside call on the telephone display. You can activate the Call Timer manually
or automatically. The Call Timer
automatically actives for a call if you have an Automatic Call Timer key on your phone or
if you activate the feature in the
Menu
+
Feature Preferences
sub-menu. You can manually activate the Call Timer from the
soft keys or with a Manual Call Timer key.
The Call Timer also provides:
• Review of Previously Timed Call
Any time after hanging up from a timed call, you can review the duration of that call.
• Timer Reset for Current Call
While timing a call, press
CLEAR
at any time to reset the Call Timer to 00:00:00.
• Automatic Timer Stop
The Call Timer automatically stops when you hang up the call.
• Wrap-up Timer Display
After hanging up a timed call, a display will show the Call Timer data for 6 seconds before returning the display to
idle. This gives you adequate time to make a record of the timed call, if desired.
Using the Call Timer
To automatically time your outside call:
1. Check to be sure you have an Automatic Call Timer key or that the timer is enabled in the
Menu
+
Feature
Preferences
sub-menu.
2. Do nothing - the Call Timer will automatically start and stop for outside calls as required.
To manually time your outside call:
1. Press your Call Timer key (automatic or manual).
OR
2. Push
Time
(
Timer
).
To manually stop timing your outside call:
1. Press your Call Timer key (automatic or manual).
OR
2. Push
Time
(
Timer
).
To check the duration of the previously timed call:
1. Press your Call Timer key (automatic or manual).
2. Optionally, see the Call Timer Menu Options charts below.
40 | DSX |
Features
XML to PDF by RenderX XEP XSL-FO Formatter, visit us at http://www.renderx.com/