DS1000/2000 Correspondence Course
DS2000 System Installation
NEC America
DS1000/2000 Workbook
◆
119
Using the PC Card Erase Utility
To completely erase a Database PC Card (P/N 85880):
This function will completely erase all the databases in a Database
PC Card (P/N 85880).
1. Insert the PC Card into the CPU.
2. Be sure the CPU mode switch is set to RUN.
3. Enter the programming mode.
4. Dial 9908 + HOLD.
You see: ERASE ALL (Y/N).
5. Press Y + HOLD to continue.
You see ABORT (Y/N).
6. Press N + HOLD to continue.
To abort this procedure and return to step 4, press Y + HOLD
instead.
7. When the PC card is completely erased, you see: PCCARD ERASED!
8. Press CONF twice to exit.
Restoring Site Data
To use the PC Card to restore site data:
1. Insert the PC Card into the CPU.
2. Be sure the CPU mode switch is set to RUN.
3. Enter the programming mode.
ICM + #*#* + HOLD
4. Dial 9907 + HOLD.
You see: START?
5. Dial Y + HOLD.
You see the name and date of the first database stored. If no data-
bases are stored, you see:
9907: DB00
(empty)
6. Press VOL
▲
or VOL
▼
to scroll through the database addresses and
select the one you want to restore.
U Slot software 02.00.01 and above have 16 data base addresses:
DB 00 to DB 15
7. When the database you want to restore displays, press HOLD.
The PC Card Active LED is on during restore.
You automatically exit programming when the backup completes.