DS1000/2000 Correspondence Course
System Programming
NEC America
DS1000/2000 Workbook
◆
169
If you have a system available for your use, continue with the following section,
after you . . .
❏
Complete Questions 31-40
in the Answerbook
Step 11: Should extension have access to a Message Center?
•
If you want the Message Center key on the keyset:
In Program 1701 - Programmable Function Key
Assignment, assign a keyset programmable key as a
Message Center key (code 24). The Message Center
can be an installed or uninstalled extension, but must
be in the system’s number plan (e.g., 300-379 in U
Slot).
•
If you want the Message Center key on the DSS
Console:
In Program 1704 - DSS Console Key Assignment,
assign a DSS Console key as a Message Center
key (code 24). You must also enter the Message
Center mailbox number. The Message Center can
be an installed or uninstalled extension, but must
be in the system’s number plan (e.g., 300-379 in
U Slot).
•
In Program 1701 - Programmable Function Key
Assignment, make sure a keyset key is not
assigned as a Message Center key (code 24).
•
In Program 1704 - DSS Console Key Assignment,
make sure a DSS Console key is not assigned as a
Message Center key (code 22).
Step-by-step guide for setting up Voice Mail
(Sheet 4 of 4)
If yes
If no