DS1000 02.10.09 Release Notes
Enhanced Features in 02.10.09
DS1000 Release Notes
47
◆
02.10.09
To cancel Selectable Display Messaging:
1.
Press
ICM
and dial
*3
.
OR
Press
PROGRAM
+
CALL FWRD
. You see:
2.
Dial
0
.
OR
Press
NONE
.
OR
Press
CLEAR
.
It is no longer necessary to press
SPK
to hang up.
3.
Selectable Display Messaging is cancelled.
System Programming Password Protection
Duplicate Passwords Won’t Lock Out Programming
When programming passwords in 9905-Password, the system will enforce the higher level pass-
word if there are duplicate entries. For example, if you inadvertantly set the level 3 (Installer) pass-
word the same as either level 1 (System Administrator 1) or level 2 (System Administrator 2), the
system will enforce the level 3 password. In prior software versions, the system would enforce the
lower level password if there were duplicate entries. This would lock you out of system program-
ming, since only level 3 can program passwords.
System Timers, Trunks
Ringing Signal End Detect Timer Name Change
The prompt for 0402-Ringing Signal End Detect Timer is changed from
SIGNAL STOP DET?
to
RING STOP DET?
.
Tandem Trunking / Unsupervised Conference
New COS Bit Added For Unsupervised Conference
An extension can set up an Unsupervised Conference only if:
●
The new Extension Class of Service option 0101-Unsupervised Conference is enabled.
●
One of the trunks involved in the Unsupervised Conference has 1003-Tandem Trunk
enabled.
This new Extension Class of Service option ensures that enabling 1003-Tandem Trunk for Off
Premise Call Forwarding does also not inadvertantly enable Unsupervised Conference.