DS1000 02.10.09 Release Notes
Enhanced Features in 02.10.09
DS1000 Release Notes
41
◆
02.10.09
To enter data:
1.
Enter the programming mode.
2.
Dial 0202 +
HOLD
.
3.
Press
Vol Up
until you see:
PG RING SRC [NONE]
.
To see the available entries for this option, press HOLD before going to the next step.
The entries are E (extension), T (trunk), and N (none).
To clear this entry (i.e., reset to NONE), press N or CLEAR.
4.
Dial
E
(3) + Dial the number of the extension that should activate ringing over the External
Page zone +
HOLD
.
5.
Press
CONF
to exit program 0202.
When entering data, pressing:
●
Vol Up advances to next prompt.
●
Vol Down backs up to the previous prompt.
●
CHECK restores the previous entry.
●
HOLD registers the entry and advances to the next prompt.
●
CONF exists the program.
Operation
To answer the call that is ringing over the Paging speakers:
1.
Lift handset or press SPK.
2.
Dial
*0
.
3.
Converse with the caller.
Door Chime Over Page
Door Box chimes can optionally broadcast over External Paging. While Door Box chimes broad-
cast over External Paging, any extension user can dial a code (
ICM
+
*0
) to answer the Door Box.
After answering, a keyset user can press a soft key or
FLASH
to control the Door Box relay. If
Door Box chimes, ringing, and Background Music are all programmed to output over External Pag-
ing, the system uses the following broadcast priority:
●
Paging
●
Door Box chimes
●
Ringing
●
Background Music
Programming
0202-Door Chime Over Page
Use this option to enable Door Box chimes over External paging. By default, this option is dis-
abled (N).
To enter data:
1.
Enter the programming mode.
2.
Dial 0202 +
HOLD
.
3.
Press
Vol Up
until you see:
DOORCHIME OVR PG?
.
4.
Press
Y
(9) to enable Door Chimes over External
HOLD
.
OR
