NEC 78K0S/KA1+ Preliminary User'S Manual Download Page 299

Page: 299 / 304

APPENDIX A DEVELOPMENT TOOLS

Preliminary User’s Manual U16898EJ1V0UD

299

A.6 Debugging Tools (Software)

This debugger supports the in-circuit emulators for the 78K/0S Series, IE-78K0S-NS and IE-

78K0S-NS-A. ID78K0S-NS is Windows-based software.

This debugger has enhanced debugging functions supporting C language. By using its window

integration function that associates the source program, disassemble display, and memory

display with trace results, the trace results can be displayed corresponding to the source

program.

It is used with a device file (DF78K0S/Kx1 (provisional name)) (sold separately).

ID78K0S-NS

Integrated debugger

Part number:

××××

ID78K0S-NS

This is a system simulator for the 78K/0S series. SM78K0S/Kx1 (provisional name) is Windows-

based software.

This simulator can execute C-source-level or assembler-level debugging while simulating the

operations of the target system on the host machine.

By using SM78K0S/Kx1 (provisional name), the logic and performance of the application can be

verified independently of hardware development. Therefore, the development efficiency can be

enhanced and the software quality can be improved.

This simulator is used with a device file (DF78K0S/Kx1 (provisional name)) (sold separately).

SM78K0S/Kx1 (provisional

name)

Notes 1, 2

System simulator

Part number: T.B.D.

This is a file that has device-specific information.

It is used with the RA78K0S, CC78K0S, ID78K0S-NS, and SM78K0S/Kx1 (provisional name) (all

sold separately).

DF78K0S/Kx1 (provisional

name)

Notes 1, 2

Device file

Part number: T.B.D.

Notes 1. DF78K0S/Kx1 (provisional name) is a common file that can be used with the RA78K0S, CC78K0S,

ID78K0S-NS, and SM78K0S/Kx1 (provisional name).

2. Under

development

Remark

××××

in the part number differs depending on the operating system to be used and the supply medium.

××××

ID78K0S-NS

××××

Host Machine

Supply Medium

AB13 Japanese

Windows

BB13 English

Windows

3.5” 2HD FD

AB17 Japanese

Windows

BB17

PC-9800 series, IBM PC/AT

and compatibles

English Windows

CD-ROM

www.DataSheet4U.com

Summary of Contents for 78K0S/KA1+

















































































































































































































































































































Search results

Summary of Contents for 78K0S/KA1+

Reviews:

Related manuals for 78K0S/KA1+

Brands by name

Popular brands

NEC 78K0S/KA1+, Preliminary User'S Manual

Search results

Summary of Contents for 78K0S/KA1+

Reviews:

Related manuals for 78K0S/KA1+

Brands by name

Popular brands