manualshive.com logo in svg

NDI BirdDog P100, User Manual

The NDI BirdDog P100 User Manual is available for free download from our website. This comprehensive manual provides detailed instructions for operating and optimizing your NDI BirdDog P100, ensuring you make the most of its advanced features and functionalities.

Share
Download
background image

20

Factory Reset

Select this item to revert the camera back to the factory default settings. Press the HOME button on the remote 

control to confirm. All user settings for the camera will be deleted.

Reload Preset 1

When set to ON, preset 1 is set to the Home position. The camera will move to the Home position when it is powered 

on or reset. 

Video Format

Sets the camera video format. Select VIDEO FORMAT, press the “

←

” button to choose the video format, then 

press “

→

” (Pressing “

→

” button changes the value on some product models) or the HOME button to confirm. After 

confirmation, press the HOME button again to restore it. The camera will reboot by itself and the new video format 

is activated.

 

•

You can cancel by pressing the MENU button.

 

•

Depending on the video client software you are using, some video software may need to be restarted 

to obtain the new video format.

NOTE:

 The camera video format can also be changed by setting the rotary DIP switch at the back of 

the unit. The camera will use the last selected format regardless of method used.

SV (Software Version)

The  software  version  that  is  currently  running  on  the  camera.  You  may  need  this  information  when  seeking  

technical support.

Summary of Contents for BirdDog P100






























































Reviews:

No comments

Related manuals for BirdDog P100

Olympia BS-468/A User Manual preview
BS-468/A
Brand: Olympia Pages: 62
Y-cam Black Quick Installation Manual preview
Black
Brand: Y-cam Pages: 8
Velocity VL-W-M Manual preview
VL-W-M
Brand: Velocity Pages: 2
DualLite SEWL Series Installation, Operation And Maintainance Instructions preview
SEWL Series
Brand: DualLite Pages: 2
Ikegami MKC-300HD Operation Manual preview
MKC-300HD
Brand: Ikegami Pages: 35
PureLink VIP-CAM-30-20 Series Manual preview
VIP-CAM-30-20 Series
Brand: PureLink Pages: 20
X-10 REX-10 User Manual preview
REX-10
Brand: X-10 Pages: 18
Bushnell Trophy Cam 119636C Instruction Manual preview
Trophy Cam 119636C
Brand: Bushnell Pages: 36
SANJIANG JB-FSD-9082 Quick Start Manual preview
JB-FSD-9082
Brand: SANJIANG Pages: 8
S&C 360 GROUND FINDER Series Manual preview
360 GROUND FINDER Series
Brand: S&C Pages: 3
Varex Imaging 2315NDT User Manual preview
2315NDT
Brand: Varex Imaging Pages: 60
e-Line Technology ELI-SIP2-APTZ8-R30X Manual preview
ELI-SIP2-APTZ8-R30X
Brand: e-Line Technology Pages: 42
Comelit 41CPE012 Installation Manual preview
41CPE012
Brand: Comelit Pages: 56
Eneo VK-1320/WDDG2 Installation And Operating Instructions Manual preview
VK-1320/WDDG2
Brand: Eneo Pages: 36
eLine ELI-SIP-MVD-R Instruction Manual preview
ELI-SIP-MVD-R
Brand: eLine Pages: 38
Idview Digital IV-8MP180DE Quick Start Manual preview
IV-8MP180DE
Brand: Idview Digital Pages: 2
HIKVISION DS-PDD12P-EG2-WB Quick Start Manual preview
DS-PDD12P-EG2-WB
Brand: HIKVISION Pages: 6
Sennco Solutions 150001 Instructions Manual preview
150001
Brand: Sennco Solutions Pages: 23

Brands by name

Popular brands

Load more brands