NDI BirdDog P100, User Manual

Page: 27 / 61

23
This function allows you to achieve the desired status instantly, even without adjusting the following items each
time.
• Pan/Tilt Position
•
Zoom Position
• Focus Auto/Manual
•
Focus Position
• AE Mode
•
Shutter control parameters
• Bright Control
•
Iris control parameters
The settings stored using this function are recalled when the power is turned on.
1. Press the RESET button to reset the pan/tilt position.
2. Adjust the position, zooming, focusing and backlighting of the camera.
3. While holding down the PRESET button, press any of the POSITION buttons, 1 to 6, in which you want to store
the settings.
Recalling the stored settings
After you have stored your settings, press
any of the POSITION buttons, 1 to 6, to recall
those settings.
Cancelling the preset memory
While holding down the RESET button, press
the POSITION button that you wish to delete.
NOTE:
•
When the power is turned on, the camera starts with the settings stored in POSITION 1,
• When you are storing or cancelling the settings in one POSITION, you cannot call up, store or cancel
the settings in another POSITION.
•
When the menu is displayed on the screen, you cannot store, recall, or cancel the setting. Return to the
normal display before starting these operations.
• Gain control parameters
•
Exposure Compensation On/Off
• Exposure Level
•
Backlight Compensation On/Off
• White Balance Mode
•
R/B Gain
• Aperture Control
•
WD Parameter
CAMERA SELECT
STD
PRESET RESET
REV
Press a POSITION button
While holding down PRESET Button