NDI BirdDog P100 User Manual Download Page 7

Page: 7 / 61

Welcome to BirdDog!

Thank you for purchasing your P100 camera. If you have any questions regarding the camera, please contact your

authorized dealer or view our

P100 Knowledge Base

Our website also has a

User Stories

page to help inspire you to get the most out of your camera.

Using This Manual

Your P100 is a powerful and sophisticated device, so please read this manual before use and retain for future

reference.

If you are new to the world of NDI® or BirdDog cameras, begin with the

Quick Start Guide

. This will give you a good

introduction to the basic setup and operation of your new camera.

Tip

Use the controls in your browser or PDF reader to increase the page size when viewing the diagrams to reveal

much more detail.

First Step

Firmware Upgrade

Before you use your new P100, it’s a good idea to upgrade to the lastest firmware. We are always adding new

features and improving the performance of our products, so installing the latest firmware will provide you with the

best user experience.

To upgrade the firmware, please follow the Firmware Upgrade Instructions located in your firmware download

folder and perform upgrade process.

The latest firmware files are available for download here:

Firmware Updates

We’re Invested In Your Success

We pride ourselves on being approachable and easily contactable. We’d love to hear from you.

Dan Miall

Co-Founder and CEO

[email protected]

Eamon Drew

Co-Founder and CMO

[email protected]

Summary of Contents for BirdDog P100






























































Search results

Summary of Contents for BirdDog P100

Reviews:

Related manuals for BirdDog P100

Brands by name

Popular brands

NDI BirdDog P100, User Manual

Search results

Summary of Contents for BirdDog P100

Reviews:

Related manuals for BirdDog P100

Brands by name

Popular brands