NDI BirdDog P100, User Manual

Page: 23 / 61

19
Pan Tilt Zoom Menu
Digital Zoom
When set to OFF, digital zoom does not operate, and only optical zoom is available. When set to ON, 12X digital
zoom is activated and digital zoom takes over after optical zoom reaches its MAX.
Zoom Ratio OSD
Determines whether the zoom ratio displays on screen.
Video Parameters
When set to ON, the value of the settings will be displayed on screen when you use remote controller to adjust the
camera image parameters using the direct adjust buttons “+” or “-” with the feature keys on the remote controller.
Adaptive P/T
When set to ON, P/T speed are adaptive to the zoom range. For example, the higher zoom ratio you use, the slower
the speed of P/T.
MF Speed
Choose between eight manual focus speeds.
P/T Speed
Adjusts the speed at which the camera pans and tilts when controlled using the remote controller.
Preset Speed
Set the preset recall movement speed.
Pan Dir
Camera horizontal Left and right orientation setting. Options are Normal or Invert.
Tilt Dir
Camera tilt up and down orientation setting. Options are Normal or Invert.
System Menu
Pelco ID
When using RS485 (PELCO P/D) control, set Camera ID to the controlled address. This value is from 001-255.
IR-Receive (Infrared Signal Reception)
When this is set to OFF, the camera does not receive the signal from the infrared remote controller. Note that you
cannot set IR-RECEIVE to OFF when you operate the menu using the infrared remote controller. To set it to OFF,
use the appropriate VISCA controller.
Display Info
When this item is set to ON, the camera configuration is displayed for approx. 3 seconds on the screen when the
camera is powered on or rebooted.
Audio
Set to ON to enable camera MIC / Audio IN to capture an audio signal source. Set to OFF by default.
Preset Memory
This feature allows you to save the image parameters to PRESET memory. Parameters such as picture, white
balance, exposure, focus mode, zoom positions can be saved with the preset.