44
Using RS-232 (VISCA)
You can use the RS-232 port to connect to optional controllers, such as a joystick control keyboard, or control PC
station, to operate the camera, perform pan, tilt and zoom operations and to use the Preset function using the
control buttons.
An application software that supports this unit is needed if you use a PC station.
RS232 Connection
1.
On the base DIP switch:
•
Set RS232 control method.
•
Set the Baud Rate to the same setting as the keyboard you are using.
•
Set specific camera address that you want to control the camera for.
•
If you want to have the camera address to be automatically assigned by the VISCA controller, set the
camera DIP switch address to 0.
2.
Reboot the camera by turning it Off and On after the DIP switch has been set up correctly.
3.
Camera supports Daisy Chain connection up to 7 cameras.
4.
Use the included RJ45 to RS232 (VISCA) cable. The controller must be VISCA compatible.
HDMI Video Signal
SDI Video Signal
Remote Control Signal
(VISCA / RS232)
IR Remote Controller
Summary of Contents for BirdDog P100
Page 1: ...USER GUIDE NDI 5 2022 ...
Page 57: ...53 Camera Dimensions Unit mm ...
Page 60: ...WELCOME TO THE FUTURE ...
Page 61: ...birddog tv hello birddog tv ...
