NDI BirdDog P100 User Manual Download Page 42

Page: 42 / 61

Receiving NDI® Video

There are many applications that support receiving the NDI® signal that P100 produces. Each application will vary

slightly on how you choose your source.

NewTek Studio Monitor

NDI® Tools is a free suite of applications designed to introduce you to the world of IP video and is available

here

The included Studio Monitor application allows you to monitor many NDI® sources on a standard Windows

computer. Once Studio Monitor is launched, right click anywhere in the interface and select your camera from the

dropdown list.

Once connected to P100, a configuration gear icon is displayed on the bottom right-hand side of the video display

providing shortcut access the BirdUI.

NewTek TriCaster Series

NewTek TriCaster series devices allow several NDI® sources to be received simultaneously, the number of

simultaneous connections depending on what model TriCaster you have.

To select P100 as a source on your TriCaster, click on the configuration gear icon below your desired source location.

From the displayed Input Setting dialog, select your P100 source from the dropdown list.

Once connected to P100, a configuration gear icon displays next to the source dropdown window that provides

shortcut access the P100 BirdUI.

Summary of Contents for BirdDog P100






























































Search results

Summary of Contents for BirdDog P100

Reviews:

Related manuals for BirdDog P100

Brands by name

Popular brands

NDI BirdDog P100, User Manual

Search results

Summary of Contents for BirdDog P100

Reviews:

Related manuals for BirdDog P100

Brands by name

Popular brands