NCR XR3 (7613) Page 45 User Manual Download

Page: 45 / 152

Operation and Cleaning

3-32

Brightness Adjustment

Retail Platform Software (RPSW) must be present on the terminal to adjust display
brightness.

There are two methods of that can be used to set the display brightness.

•

Brightness Control Application

•

NCR Retail Systems Manager LE (RSM) Interface

There is also an API available for controlling the brightness setting. See the

SetBrightness

Method

in the

NCR Retail System Monitor User Guide

, B005-0000-1768.

Brightness Control Application

1. Run the Brightness Control tool.

Start

→

All Programs

→

NCR XR13 Brightness Control

The adjustment control is displayed. By default, the brightness is set at 100%.

2. Adjust the slide control to the desired brightness level (0%–100%).

3. The value set is saved in a configuration file. When the system is rebooted the

configuration file is read and restores the display to the saved brightness level.

Summary of Contents for XR3 (7613)

























































































































































Search results

Summary of Contents for XR3 (7613)

Reviews:

Related manuals for XR3 (7613)

Brands by name

Popular brands

NCR XR3 (7613), User Manual

Search results

Summary of Contents for XR3 (7613)

Reviews:

Related manuals for XR3 (7613)

Brands by name

Popular brands