NCR SelfServ XK32, Installation Manual

Page: 76 / 251

2-66 Hardware Installation
Floor to Ceiling Mounting Installation
Floor to ceiling installation requires the kiosk to be bolted to the floor using four anchors
and to the concrete slab ceiling using four anchors. It is the responsibility of the owning
institution to provide the anchors to secure the kiosk.
If a False Ceiling is present, an access hole needs to be cut out on the False Ceiling to
pass the Ceiling Posts towards the concrete slab.
The Ceiling Posts need to be cut to length as appropriate for the Floor to Concrete
Ceiling height of the installation site.
Maximum installation height is 4000 mm (157.48 in.).
For more details on Site Requirements and Site Preparation, refer to the NCR SelfServ™
XK32 (2247) Site Preparation (BCC5-0000-5377).