NCR SelfServ XK32, Installation Manual

Page: 246 / 251

2-236 Hardware Installation
Loading Printer Paper Roll
Change the paper when either of the two conditions in the table occur.
Amber
LED
Light
Description Action
Blinks
slow The paper is low.
There are approximately
1.5 to 7.5 m
(5-25 ft.) of paper remaining on the
roll.Depending the system application, the
host computer may send out an alert when
the paper is low.
Change the paper roll as soon
as possible to avoid running
out half way through a
transaction.
Blinks
fast The paper is out. Change the paper roll
immediately or data my be
lost.
Caution: Do not operate the printer or host computer if the printer runs out of paper.
The printer will not operate without paper, but it may continue to accept data from the
host computer. Because the printer cannot print any transactions, the data may be lost.
Note: For more information on the printer LED light meanings and troubleshooting
printer problems, refer to the NCR 7199 Thermal Receipt Station Printer User Guide (BCC5-
0000-5172).